Stromberg
  Edelbrock


   Demon
HOLLEY
Quantity
9 Super 7 We now offer a reproduction version of one of the most popular carburetors ever use "the original Stromberg 971. Original equipment on 30's and 40's cars and trucks, the Stromberg 97 has long been favord by hot rodders and racers who realized the perfornmance qualities of this timeless fuel supplier. There have been numerous attempts to reproduce this unit with little success. The Super 7 carb brings the original Stromberg 97 into the 21st Century! Features such as the choke assembly, accelerator pump, jets and cosmetics have all been faithfully retained. Additionally, eash carburetor is individually flow tested and inspected for leaks. Perfection is the result!                                                                                                $297.00
Quantity
Holly 390 CFM Carb     Ideal mate to manifolds above Vacuum secondariesm, electric choke (12volt) and Ford auto-trans kickdown provision make for an easy-to-tune street driven flathead. 
$465.00 
Quantity
 Holley Model 4160          Holley's Model 4160 4-barrel carburetors are designed for budget minded enthusiasts and are calibrated for use on stock to mildly modified engines. These classic Holley carbs features all metal parts and vacuum secondaries. They have a universal throttle lever and power valve blow-out protection. 600 CFM rating. Please state either manual or electric choke.        $325.00






Quantity
For Stromberg '97 and others$2.50
Quantity
Carb Linkage   3carb progressive linkage for flathead Ford Stromburg 94's and 97's. It can be modified to work with other 2GC Rochester applications, however the arms must be drilled for the larger diameter shafts. Maximum center to center of long shaft is 11-3/8" and maximum of short shaft is 7". Linkage can be used for either two 2 bbl or three 2 bbl applications.                                 $59.00
Quantity
3 Bolt Pad Cover Use to seal an unused engine or convert intakes for three-or-more carburetors to a better performing one or two carb operation.                             $16.50
Quantity
97 Carb Scoop,  Has a polished aluminum casting with copper screen and locking screw. It features a timeless 1950's styling and fits all carbs with a 2-5/8" diameter neck. It is compact enough for all multi-carb setups and is beautifully polished.    $29.00
Quantity
1947-48 Offy Flathead V8 Fuel Pump  These all new fuel pumps are designed to fit the Flathead Ford V8, 1947-48 $65.00
FUEL SYSTEM
OFFY
Quantity
Carter 6 Volt Electric Fuel PumpThis six volt electric fuel pump is rated at 72 GPH and 5-3/4 psi max. pressure. The inlet and outlet are 1/4" NPT. The pump comes with two hose barbs 1/4" NPT to 3/8" hose, two short electric leads and a mounting bracket with rubber isolaters. Operates on positive or negative ground.  $98.00


Carter
Quantity
.Holley Model 23002-barrel carburetors are great for improving or updating many stock Chrysler and Ford car and truck applications. The 350 CFM carburetor is ideal for small blocks. It features a manual choke, center hung float bowl, universal throttle lever, power valve blow-out protection, blue non-stick gaskets, and Fort A/T kickdown. $335.00
Quantity
Holley Street Avenger Model 4150carb is the ultimate vacuum secondary street performance upgrade. This carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vaccuum ports. It has a million mile power valve, is 100% wet flow tested and includes fittings.    570 CFM  $399.00    670 CFM $409.00      770 CFM    $439.00   Please specify
Quantity
Edelbrock '94' CarburetorThe Edelbrock 94 features die-cast bowl and air horn with a cast iron 3-bolt flange. It's throttle shaft has been extended to make it easier to set-up dual and triple carburetor combinations, especially when used with Edelbrock's exclusive progressive linkage.  $472.00
Quantity
1934-48 Ford Offy Flathead V8 Fuel Pump.These all new fuel pumps are designed to fit the Flathead Ford V8, 1934-48       $65.00.
Quantity
1949-50 Offy Flathead V8 Fuel Pump These all new fuel pumps are designed to fit the Flathead Ford V8, 1949-50          $65.00
Quantity
1952-53 Offy Flathead V8 Fuel Pump.These all new fuel pumps are designed to fit the Flathead Ford V8 1952-53    $65.00
Quantity
1958-65 Buick Fuel Pump    Fits most '58-'65     Buick 364,401, 425 Nailhead V8s       .$45.00
Quantity
Flathead Fuel Pump Block OffThis flathead fuel pump block off is used when removing the original fuel pump. Works on 1942-48 Ford/Mercury V8's.    $20.00
Quantity
Billet Aluminum Big Block Chevy Fuel Pump Block off Plate     We are an exclusive dealer for "Phoenix Machine" high quality products. This highly polish Billet Aluminum block off plate will be the perfect accent for your big block chevy. Made in the USA$20.00
Quantity
Billet Aluminum Chevy Small Block Fuel Pump Block Off Plate    We are an exclusive dealer for "Phoenix Machine" high quality products. This highly polish Billet Aluminum block off plate will be the perfect accent for your small block chevy. Made in theUSA$20.00



Quantity
Billet Aluminum Small Block Ford Fuel Block off Plate   We are an exclusive dealer for "Phoenix Machine" high quality products. This highly polish Billet Aluminum block off plate will be the perfect accent for your ford small block. Made in the US$20.00
Quantity
Three Outlet T-Style Fuel Block Chrome plated fuel block with for three carburetor applications. Precision die cast. 3/8" NPT inlet, 1/4" NPT outlets  $16.00.
Quantity
Two Outlet T-Style Fuel Blocks  Chrome plated fuel block for two carburetor applications. Precision die cast. 3/8" NPT inlet, 1/4" NPT outlets       $13.00
Quantity
Offy 3-Hole Fuel Block  This Offy fuel block has large 3/8" NPT inlet and outlets, equalize fuel flow to any multiple carburetor application. Polished aluminum construction with four mounting screwholes     $65.00
Quantity
Aluminum Fuel Filter We offer these highly polished aluminum filters complete with reusable stainless steel filter elements. This filter is intended for carbureted systems only. Feature a fine mesh screen, which filters down to 10 microns. Filter elements can be cleaned in solvent and reused. This in-line version measures 2-3/8" long by 1-1/2" diameter.             $28.00
Billet Aluminum Fuel Filter Fully polished aluminum 3/8" I.D. Inlet and outlet.    Not for fuel injection$13.50
Quantity
Quantity
Accelerator Pump RodsWe have a limit supply of these hard to find"everybody needs them" linkage rods. They are brand new. Fits all Stromberg 97 carburetors.                                         $11.00
Quantity
Holly 94 Rebuild Kit Model AA-1 2100, and 2110 (Repl. 97 Carb). Complete gasket set includes new needle and seat, power valve and accelerator pump.        $27.00
Quantity
Stromberg 97 Master Rebuild Kit  Kit includes complete gasket set, needle and seat, air bleed screws, jets and accelerator pump.      $35.00
Quantity
Stromberg 97 Standard Rebuilt Kit  Accelerator pump, needle and seat and all the gaskets are in this kit.   $25.00
Quantity
Stromberg 97 Phenolic Carb Spacer  These 1/4" thick spacers fit common three bolt base Stromberg, Holley and Ford carbs  $23.00