Valve covers set an engine compartment off.  Kelly's Hot Rod Partscarries varity  of valve covers at prices that can't be beat.
Quantity
1960-1986 Small Block Chevy Tall Chrome Valve Cover: Smooth, steel covers have a beautiful chrome finish. Has a 1.25" push in breather hole      $22.00 pr
Quantity
1960-1986 Small Block Chevy Short Chrome valve cover: Smooth, steel covers have a beautiful chrome finish. Has a 1.25" push breather hole      $20.00 pr
Chevy 348/409 Finned Aluminum Valve Covers:Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened. $310.00 pr
Quantity
Chevy 348/409 Polished Finned Aluminum Valve Cover: 348 and 409 Chevys finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened. Polished finished.  $480.00 Pair

Quantity
SBC Tall Finned Valve Cover: These aluminum valve covers they are the tall design to help with rocker arm clearance. This full-finned holeless design is for use on 1958-1986 Small Block Chevy engines.
Holeless, Baffled, Polished, Tall (3-11/16| Full Finned

$110.00 a pair
Quantity
Tall Valve Cover For 60-86 S/B Chevy:  Plain Steel : Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Fits '60-'86 S/B Chevy V8.  $25.00 pair
Quantity
Tall Valve Cover For 60-86 S/B Chevy: Plain Aluminum; Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Plain, as-cast finish.        $45.00 Pair

Quantity
Small Block Chevy Polished Aluminum Tall Valve Cover:Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. $63.00 Pair
Quantity
S/B Chevy Center-Bolt Valve Covers: These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay.

For 1987-up heads and Vortec style small block Chevy heads
Beautiful chrome plated steel finish
1-hole per cover with separate oil fill and PCV holes
Holes are 1-1/4" with baffles
Grommets are NOT included
Sold as a pair
Suggested bolt length of 3-1/2" $40.00 pair

Quantity
S/B Chevy Center-Bolt Valve Cover  These stock dimension valve covers are for 1987-up heads and Vortec style small block Chevy heads. They feature a beautiful chrome finish to dress up your engine bay. These valve covers have 2-holes per cover with separate oil fill and PCV holes. Holes are 1-1/4" with baffles.
Stock dimension valve covers

Beautiful chrome plated steel finish
2-holes per cover with separate oil fill and PCV holes
Grommets are NOT included
Sold as a pair
Valve Cover Depth: 2-1/8"
Hole Size: 1-1/4"
Hole Style: Push-in
Baffeled: Yes
Suggested Bolt Length: 3-1/2" $42.00 Pair
Quantity
Chevy Bow Tie Valve Covers:  These polished aluminum valve covers fit 1960-1986 S/B Chevys and are made to GM specs. They feature OEM style baffles and dippers. Available with the Chevy Bow Tie. Valve cover depth is 3-9/16". One 1-1/4" push-in hole per cover. Suggested bolt length is 1-1/4". $140.00 pair
Quantity
Chevy Valve Covers: These polished aluminum valve covers fit 1960-1986 S/B Chevys and are made to GM specs. They feature OEM style baffles and dippers. Valve cover depth is 3-9/16". One 1-1/4" push-in hole per cover. Suggested bolt length is 1-1/4". $95.00 pair
Quantity
S/B Chevy Fabricated Aluminum Sheet Metal Covers: Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! Each cover comes with a single baffeled 1-1/4" hole for PCV or oil fill. Can be painted, polished, or left in bare aluminum finish.

Overall Height: 3-3/8"
Overall Width: 5-1/8"
Overall Length: 19-1/2" (including mounting flange)
Approximately 2" up on sides, the valve cover is beveled inward at about 45 degrees
Top-most flat surface is 2" wide
2-3/8” from the mounting surface to the bottom of the baffle
Breather Hole: 1-1/4"
fits 60-86

$115.00 pair
Quantity
S/B Chevy Fabricated Aluminum:Sheet Metal Covers: Fits 1960-1986 Small Block Chevy 283-400 c.i. V8. These fully welded sheet aluminum covers feature a 1/8" thick flange for a great seal. Can be painted, polished, or left in bare aluminum finish. Bolts and washers included for mounting with valve cover. Gaskets not included. $105.00 pair

Overall Height: 3-5/8"
Overall Width: 5-1/8"
Overall Length: 19-1/2" (including mounting flange)
Flange Thickness: 1/8"



Quantity
"OLDS" Valve Covers for S/B Chevy:  These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads. They can also be used with conventional small block cylinder heads by using the valve cover adapter kit

These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. $125.00 pr
Quantity
OLDS POLISHED VALVE COVERS;These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. Polished Valve Covers. $150.00 Pair
Quantity
472-500 Caddie Valve Covers: Add a little shine to your big inch Caddy motor. Chrome Steel. $35.00 a pair.
Quantity
EDELBROCK CLASSIC 262-400 V8 FINNED ALUMINUM VALVE COVERS: Fits 1960-86 small block Chevys from Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height of 3 1/2 inches is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. No Holes and Made in the USA.
$185.00 Pair


Quantity
EDELBROCK CLASSIC FINNED ALUMINUM VALVE COVERS-1959-86 Chevy 262-400 SBC
This classic series Edelbrock valve cover is designed with a heavy gauge aluminum material. It has an overall height of 3-1/2" and a satin finish.With oil fill hole. Made in the USA. $195.00 pair.

Quantity